HomeHome & Family8 Important Steps On How To Do A Pool Leak Detection

8 Important Steps On How To Do A Pool Leak Detection

Leak detection is a type of process that determines any leak that has occurred in any types of system that contains gases and liquids. Some of the methods used in Orange County, CA in detection are infrared, laser technology, and hydrostatic testing. The pipeline networks are considered to be the safest and the most economic mode when transporting gases, oil and some other fluid products. If these are just maintained well, pipelines may impossibly have leaks.

Leaks usually occur if an excavation process or its equipment happen to be near the area of pipelines. So therefore, you must consult the authorities importantly before the excavation to ensure that that the area or the vicinity does not have any pipelines. Leaks commonly happen in pools. And however, these defects are now being identified through the modern tools in pool leak detection Orange County to correct it. Accidents, earth movements, or sabotage are other reasons other than excavations.

This article is written to give you 8 easy steps to follow in determining leaks in the swimming pools. First, you check on the parts or areas where leaks will be obvious. It can be done through checking the pipe valves, heaters, pumps, and filters, checking the moisture on the ground or on the surrounding areas such as the soil, and checking some separations on cleaner line, fittings, lights, skimmers, steps, returns, and corners.

Second, double check the said areas for confirmation. It can be done by marking the water level on skimmers. Check it after 24 hours and mark again the level. If the water looses one fourth of it, definitely, leak is there. And also, it may be done by placing a bucket filled with water and bricks for the weight. Be sure that the water levels from both the inside and the outside have the same levels and mark it. If the water from the outside drops from the line, leak is there.

Third is determining leak location. Filtration systems must be turned off first and be mindful on the level of water dropping. If it stops on skimmers, problems may be from the skimmer or from the filtration system. Other parts such as the lights, backwash, and drainage, and also some gaps, cracks, and tears must be checked.

Fourth, put some dye test solution or pH indicator into the pool. Before doing this, turn off the pump. Then after, check whether the dye is sucked in to the cracks, tears, or gaps. Fifth, fixing it will depend on its location. In skimmers, lights, and liners, you may use a pool putty, caulk, silicone, or patch kits.

Sixth is some leaks may not be determined with those procedures stated above. Professionals can be called if ever this happens. There are a lot of technologies now for detection like compressed air, television cameras, and many more.

Seventh, you also need to understand the basics in plumbing for visualizing what pool techs can do in fixing the problem. The configuration of this is very simple. You just need to know on how the waters are being processed and its way of transportation into the pool.

Eighth, be sure that the contractor that you will hire has a business license. This can be checked and confirmed from the nearby department in your city or town. Some cities and towns may require a trade license.

Find a list of the advantages you get when you use pool leak detection Orange County services and more info about a reliable service provider at http://www.leakdetectionusa.com today.

Filed: Home & Family
tags: ,